Regional 2026 South Puget Sound and Seattle-metro fence installation pricing that applies to Covington, WA homeowners — $35–$55 per linear foot installed for a 6-ft cedar privacy fence, so a bare 150-foot backyard perimeter lands at $5,250–$8,250 before Covington's 9.30% sales tax.
Fence Installation in Covington, WA typically costs $35–$55 per linear foot installed for a 6-ft cedar privacy fence — a bare 150-ft run works out to $5,250–$8,250 before tax per visit in 2026, depending on property size and job conditions. Most Covington property owners pay the mid-range tier. Get an exact, itemized price for your address in under 60 seconds with an instant Quotly quote.

Covington is a young city by King County standards, and it shows in the fence lines. Most of the housing stock behind Kent-Kangley Road and along the SR 18 corridor went up in the 1990s and 2000s, which means a very large share of the cedar privacy fences around Timberlane, Wilderness Estates, Crystal View and the plats near Jenkins Creek are now hitting the age where posts rot at the ground line and panels start to lean. That is why the single most common quote request here is a 6-foot cedar privacy fence, which runs about $35–$55 per linear foot installed. A standard suburban backyard perimeter of roughly 150 linear feet therefore lands at $5,250–$8,250 before tax, with no gate and no tear-out of the old fence included in that figure. About 21,000 people live in Covington, nearly all of them inside the 98042 ZIP code shared with East Kent, and the lots are mostly compact suburban rectangles rather than acreage — a big reason perimeters here cluster near that 150-foot mark instead of the 300-plus-foot runs you see out toward Black Diamond. The Pacific Northwest's long wet season is the other local factor: it is the reason cedar, which is naturally rot-resistant, out-sells pressure-treated pine here, and the reason vinyl earns its premium by never rotting at all. One important note on the numbers below — they reflect the broader South Puget Sound and Seattle-metro fencing market (the same band that covers Kent, Maple Valley, Renton and Auburn) rather than street-level Covington quotes. They are an accurate planning range; a firm number still takes an on-site measurement.
| Lot Size | Per Visit | Monthly (4×) |
|---|---|---|
| Chain-link, galvanized — 4 ft | $18–$25/ft | Cheapest option in Covington; good for pet runs and marking a property line |
| Chain-link, galvanized — 6 ft | $22–$32/ft | Taller galvanized run; typical chain-link project totals $2,000–$6,500 at the galvanized tier |
| Chain-link, black vinyl-coated — 4 ft | $22–$30/ft | Coated product line — separate from galvanized, disappears better against landscaping |
| Chain-link, black vinyl-coated — 6 ft | $28–$38/ft | Coated 6-ft run; longer-lasting finish than bare galvanized steel |
| Cedar privacy, 6 ft | $35–$55/ft | The Covington default; a bare 150-ft perimeter runs $5,250–$8,250 before tax |
| Vinyl privacy, 6 ft (tongue-and-groove) | $40–$55/ft | Standard vinyl privacy panel — no staining, ever |
| Vinyl privacy, 6 ft with lattice top | $50–$65/ft | Decorative lattice topper adds height and light without full solid panel |
| Vinyl, premium / wood-grain | $60–$85/ft | Top vinyl sub-tier; textured wood-look finish at a vinyl maintenance level |
| Cedar, horizontal / designer | up to ~$110/ft | Modern horizontal-slat look; premium lumber grade plus added labor |
Prices reflect 2026 rates from verified contractors serving the 98042 ZIP code area. Need an exact number? Get an instant Covington fence installation quote based on your actual lot.
Sample quote based on a typical Covington property. Your actual price may vary — get your own Covington fence installation quote in 60 seconds.
A professional fence quote in Covington should bundle the following into the per-foot price. The gap between a suspiciously low bid and a fair one is almost always what got left out of this list — ask line by line before you sign.
Fencing is quoted by the linear foot, and material is by far the biggest lever on the total. Two things to read carefully in this table: chain-link is priced by coating as well as height — galvanized and black vinyl-coated are separate product lines that do not share a price range — and vinyl privacy splits into distinct sub-tiers with different ceilings.
| Pricing Model | Typical Price | Best For | Trade-offs |
|---|---|---|---|
| Chain-link, galvanized — 6 ft | $22–$32/ft | The budget floor. Pet containment, property lines, and back-of-lot runs where privacy isn't the goal; typical chain-link projects total $2,000–$6,500 at this tier. | No privacy at all, and bare galvanized steel reads industrial against a landscaped Covington backyard. |
| Chain-link, black vinyl-coated — 6 ft | $28–$38/ft | The same open layout as galvanized with a coated finish that resists rust and visually recedes into hedges and tree lines. | Costs more than galvanized for the same function, and still gives you zero privacy. |
| Cedar privacy, 6 ft | $35–$55/ft | The Covington default — full privacy plus natural rot resistance that suits a long wet season. A bare 150-ft perimeter runs $5,250–$8,250. | Needs periodic staining or sealing to hold its color, and boards can cup or check over time. |
| Cedar, horizontal / designer | up to ~$110/ft | Homeowners who want the modern horizontal-slat look on a newer build or a remodel where the fence is a design element. | Highest per-foot price on this page; premium lumber grade and slower installation labor drive it. |
| Vinyl privacy, 6 ft (tongue-and-groove) | $40–$55/ft | Homeowners who never want to stain a fence again. Standard solid vinyl privacy panel, immune to rot in wet PNW winters. | Costs more than standard cedar up front, and a damaged panel is harder to patch invisibly than a swapped cedar picket. |
| Vinyl, premium / wood-grain | $60–$85/ft | Getting a wood look with vinyl maintenance — textured, wood-grain finishes at the top of the vinyl range. | Overlaps cedar pricing without cedar's look-and-smell authenticity; the value case depends on how much you hate staining. |
Most Covington lots don't need the front yard enclosed to get the privacy homeowners actually want. Dropping the front return can cut 40–60 linear feet off a cedar job, which is $1,400–$3,300 at the $35–$55/ft band.
If the goal is containing a dog or marking a line rather than blocking sightlines, galvanized chain-link at $18–$25/ft for 4-ft or $22–$32/ft for 6-ft does it for a fraction of cedar. Save the cedar budget for the runs neighbors actually see.
Tear-out and disposal of an existing fence is a separate line item at $3–$7 per linear foot — $450–$1,050 on a 150-ft run. If your posts are still solid at the ground line, swapping only rails and pickets can skip most of that.
A single cedar walk gate is $150–$300, but a single drive gate jumps to $1,100–$1,600 and a double gate runs $400–$900. One walk gate plus a wider single access panel usually beats a drive gate for what a Covington backyard actually needs.
Covington crews are stacked from June through August when the ground is dry and everyone wants the fence up before the July 4th barbecue. Getting on the schedule in late winter or early fall shortens lead times and gives you more negotiating room.
| ZIP | Neighborhoods Covered |
|---|---|
| 98042 | All of Covington — Lakepointe, Timberlane, Wilderness Estates, Pipe Lake, Jenkins Creek, Covington Town Center, Crystal View, Winterwood, Kentwood and Covington Park — plus the adjacent East Kent neighborhoods and unincorporated King County toward Maple Valley that share the same ZIP. |
Fence projects in Covington are governed more by permitting, property lines and plat covenants than by anything else. Sort these out before a crew mobilizes — moving a finished fence is far more expensive than checking first.
Verified contractors on Quotly serve fence installation customers across Covington and surrounding King County neighborhoods, including:
What to expect month-by-month for fence installation in the Covington, WA climate.
| Month | Recommended Activity |
|---|---|
| January | Wet, cold ground slows installs — the best month of the year to collect quotes and claim a spring slot. |
| February | Still deep in the wet season; crews are available but saturated post holes add labor on clay-heavy Covington lots. |
| March | Ground begins to firm up and the booking rush starts ahead of the April growing season. |
| April | Growing season opens in Covington and fence demand climbs with it — book now to beat the summer queue. |
| May | Peak planning month; get the fence in before landscaping and shrubs fill in along the line. |
| June | Dry, stable soil makes this prime install weather and the start of the busiest stretch. |
| July | Peak fence season — expect the longest lead times and the least pricing flexibility of the year. |
| August | Still dry and heavily booked; a strong month for cedar and vinyl before the rains return. |
| September | Demand eases as summer winds down, which usually means shorter waits without off-season delays. |
| October | Growing season closes and the wet season sets in — get posts set before the ground turns. |
| November | Off-season schedules open up, though rain can push install dates by a week or two. |
| December | Slowest month in Covington; good for planning, measurements and locking a quote, with installs weather-permitting. |
The dominant driver. 6-ft cedar privacy runs $35–$55/ft, horizontal or designer cedar climbs to about $110/ft, vinyl privacy spans $40–$85/ft across its sub-tiers, and galvanized chain-link starts at $18/ft for a 4-ft run. On chain-link, the coating matters as much as the height — black vinyl-coated prices above bare galvanized at every height.
Everything is quoted per linear foot, so total length sets the base. A standard Covington suburban perimeter is roughly 100–200 feet; the headline figures on this page assume exactly 150 feet with no extras.
Gates are priced separately from the per-foot fence, never folded into it. A single walk gate is $150–$300 in wood or $400–$600 in vinyl, double gates run $400–$900, and a single drive gate runs $1,100–$1,600.
Tear-out and haul-away of an existing fence is its own line item at $3–$7 per linear foot, added on top of the new-install rate — $450–$1,050 on a 150-foot run. With so much of Covington's fencing now 20-plus years old, this line shows up on a majority of local quotes.
Slopes, rocky or root-bound soil, and tight side-yard access all add labor. Lots backing onto the Jenkins Creek and Soos Creek greenbelts often mean root-heavy digging, and wind-exposed runs may call for steel posts instead of wood, which moves the cedar band upward.
A required permit adds $100–$500. Separately, lumber grade moves the cedar number: tight-knot cedar sits at the top of the $35–$55/ft band while standard-grade sits near the bottom, for the same design.
See fence installation costs in Maple Valley, Kent, Des Moines, and Federal Way.
Get pricing for Lawn Mowing Cost, Pressure Washing Cost, Junk Removal Cost, House Cleaning Cost, Window Cleaning Cost, Dog Waste Removal Cost, Driveway Installation Cost, Gutter Cleaning Cost, and Carpet Cleaning Cost in Covington, WA.